iMacros version 6 Error Codes

From iMacros
Revision as of 03:48, 17 February 2011 by Td (Talk | contribs)

Jump to: navigation, search

iMacros version 6 Error Codes


Errors that can occur during setup or if an installation is corrupted.

Code Reason
-110 Command Line Error: No Macro!
-102 Dialog Manager not started
-103 Dialog Manager not stopped
-167 Browser timeout issue*
-184 Error: Wrong value for !EXTRACT_TEST_POPUP
-187 Error: Wrong value for !ENCRYPTION
-189 Error: Wrong value for !POINTER


Errors that can occur during macro recording.

Code Reason
-200 Tab X does not exist
-201 Please use the mouse to select the next recording position
-201b Error while reading this line: [x]
-203 Found wrong macro command while loading file: [x]
-251 Selected entry not available: x. Disable this message with SET !ERRORIGNORE YES
-255 Downloader can not intercept this download during RECORDING. Replay mode might work
-256 Downloader can not intercept this download. Try the SAVE AS feature.
-260 Error: EXTRACT needs Internet Explorer 6.0 or better to work correctly.
-261 Error: Invalid !LOOP value: [x]
-282 Incorrect decryption password supplied. Please enter the correct password in the OPTIONS dialog or re-run the macro.
-283 Incorrect decryption password supplied. Please enter the correct password in the OPTIONS dialog or re-run the macro.


Errors that can occur during macro replay.

Code Reason
-301 Error in Line x (TAG command not found in web page)
-301b Datasource [x] not found
-302 Frame not found F=[x]
-302b Element empty - Web page problem in Line [x]
-302c Variable [x] not defined. It is not an internal variable and no external datasource was defined
-303 Variable [x]: Please specify the number of columns in the CSV file
-304 Frame parameter not a number
-304b Error reading datasource: Line [x]
-305 Datasource not found.
-306 Unrecognized command, please contact support.
-310 This macro was created with an older version of iMacros.
-311 WAIT Parameter must be the time in seconds
-314 Macro too large for the non-commercial IE Edition: Macro truncated.
-318 Datasource end of file (see related forum post)
-322 Error: Website did not respond (Timeout)
-329 Error: POS Parameter not numeric: [x]
-331 Page Error, and CONTINUE=NO
-332 Security dialog appeared and STOP=YES
-333 Text Found => FAIL_IF_FOUND error triggered
-335 SaveItem Timeout: Could not download item from
-336 No URL for SAVETARGETAS found.
-340 URL contains unsupported characters. Typically " ", as in "file:///D:/a b/t.htm" => Replace " " with "%20": "file:///D:/a%20b/t.htm"
-342 Scripting Interface: Communication Error
-345 EXTRACT ELEM value to high (legacy)
-349 Selected entry in a select box is not available
-350 Stopwatch Parameter incorrect
-350 Could not find macro
-351 SAVEAS Type incorrect
-351a Image Recognition Plugin not installed.
-351b SAVEAS TYPE=BMP supports only screenshots from the the first tab.
-352 IMAGESEARCH and IMAGECLICK commands require the Image Recognition Plugin.
-352a Plus symbol (+) not supported with SAVEAS TYPE=EXTRACT: [x]
-352b Please use the iMacros Browser for taking web page screenshots. SAVEAS TYPE=BMP is not supported in the IE-Plugin.
-355 Timeout during download. You can increase the timeout value in the OPTIONS dialog or with SET !TIMEOUT"
-356 ONDIALOG: Wrong value for BUTTON
-356a ONSECURITY: Wrong value: BUTTON
-356b ONERROR: Wrong value: BUTTON
-357 Wrong certificate value: [x]
-359 Wrong value for ONPRINT BUTTON=<x>
-361 WINCLICK: X coordinate not a number: [x]
-362 WINCLICK: Y coordinate not a number: [x]
-370 Internal Error during encryption
-373 In the TRIAL VERSION the DATASOURCE Number of Columns is limited to 10
-379 Unknown DirectScreen command. List of allowed DS commands
-381 Error: Invalid !LOOP value: [x]
-382 Could not find INPUT IMAGE, location = [x]
-382a Could not find Image Search Plugin (imimage.dll)
-382b Could not find Image Search Plugin (imimage.dll)
-382c Error: Invalid DATASOURCE_LINE value: [x]
-382d Error: Wrong value for !HTMLPOPUIGNOREIGNORE
-383 Error: Invalid VARSETALL value: [x]
-383a Error: DATASOURCE Number of Columns too high (max. value is 30).
-383b Error: Invalid timeout value: [x]
-384 Error: Invalid replay speed value: [x]
-384b Error: EXTRACTADD value: [x]
-384 Error: Invalid DATASOURCE Number of Columns value: [x]
-384a Error: Wrong value for !EXTRACTDIALOG
-384b Only !VAR1, !VAR2 and !VAR3 can be used with SET.
-385 Error: EXTRACT value: [x]
-385a Error: Wrong value for !ERRORIGNORE
-388 Error: Wrong value for !DIALOGMANAGER
-390 Error: Wrong value for !CHECKING
-393 Error: SET Parameter not recognized: [x]
-394 Error: ADD Parameter not recognized: [x]
-605 Could not find image in browser screen

Internet Explorer

Errors specific for the IE Add-on.

Code Reason
-401 The IE Plugin supports only one new window (TAB T=2)
-402 TAB command syntax error

Command Line Interface

Errors when calling iMacros via the command line or Scripting Interface. This error code should not be confused with the Scripting Interface Return Codes, which are codes between -1 and -100.

Code Reason
-522 Command Line Error: No Macro found