View source

{{DISPLAYTITLE:!TIMEOUT_TAG}}
Set the [[TAG]] command timeout in seconds. If the corresponding HTML element is not found within that interval, the macro will exit with an error. Adjust the wait time if dealing with tricky AJAX pages, where elements can appear after a while without triggering a page reload.

Version 7: Use [[!TIMEOUT_STEP]].

=== Value [[Image:IMacros-icon.png|iMacros Browser]] [[Image:Ie-icon.png|IE Plug-in]] [[Image:Ff-icon.png|Firefox]]===

Integer > 0 that gives the number of seconds a page may take to load completely.

Default: 1/10 of !TIMEOUT_PAGE, which means 6 seconds if !TIMEOUT_PAGE has the default value of 60 seconds.

=== Set By ===
[ ] Internal

[X] [[SET]]

'''Internal''' means that the iMacros program itself sets the value of the variable during program run. [[SET]] means that the user can set this value via the [[SET]] command inside a macro.

=== Examples === 

 ' exit with error if TAG is not found after 3 seconds
 SET !TIMEOUT_TAG 3 

=== See Also ===

[[TIMEOUT_MACRO]], [[TIMEOUT_PAGE]]